******************************************************************************
* Unsuccessful Unarchiving During Installation				     *
******************************************************************************
It is possible that the install program may fail in its attempt to unarchive
the files on the second disk. If it does fail, it will not copy the archived
files to the destination directory. You will therefore be missing several
very important files. You can get around this by doing the following:

    1. If you're installating from a 360K 5¬ floppy disk, make sure that you
       have the Commander Disk 2 in the drive. (All of the programs and files
       are contained on one 720K 3« floppy, so just make sure that you have
       this disk in the drive).
    2. Change to the drive you installed from.
    3. You can extract the archived files with this command:
         nc_arc -o <destination directory>

    For example, assume that you have been installing from your 360K floppy
    drive (drive A:), to the directory C:\NC. To unpack the archived files,
    you need to enter the following (Don't type anything that's enclosed in 
    brackets):
    	1. [Make sure that the Comamnder Disk 2 Commander is in the drive.]
	2. A: [enter]
	3. nc_arc -o c:\nc [enter]
